(587) 316-8169
Technically Reviewed by
- Garrik Amirov
on
- December 17, 2023
Written by TechVill Appliance Repair Ltd. Editorial Contributors
- The Most Common Reasons
- Let’s Take a Look at Each of These Problems and How to Solve Them
- 1. Balance the Load
- 2. Reset the Washer
- 3. Check the Door Lock or Lid Switch
- 4. Inspect the Drive Belt
- 5. Ensure Proper Drainage
- 6. Other Potential Culprits
- Motor Coupling
- Suspension Rods (Top-loader)
- Shock Absorbers (Front-loader)
- Drum Nut (Top-loader)
- TechVill is Your Best Choice When Samsung Washer Not Spinning
- FAQs On Samsung Washer Not Spinning
One common issue that Samsung washing machine owners may encounter is a machine that refuses to spin.
If you’re facing this problem, don’t fret – there are several troubleshooting steps you can take to fix it.
The Most Common Reasons
Samsung washers might fail to spin due to various reasons, commonly attributed to issues with the lid switch, unbalanced loads, a malfunctioning drive belt or motor, clogged or defective drain pump, or electronic control board problems.
A faulty lid switch might prevent the washer from engaging in the spin cycle as a safety measure. Unbalanced loads can trigger the machine’s automatic shut-off to prevent damage during spinning.
Issues with the drive belt or motor can hinder the spinning action, while a clogged drain pump might inhibit water drainage, thus halting the spin cycle.
Electronic control board malfunctions can also disrupt the washer’s operation, including its ability to enter the spinning cycle properly.
Identifying and addressing these issues are crucial steps in restoring the spinning functionality of a Samsung washer.
Let’s Take a Look at Each of These Problems and How to Solve Them
Each individual reason will require an individual approach to its solution:
1. Balance the Load
An unbalanced load washer is a common reason for a Samsung washer to not spin. To ensure proper spinning, make sure your load is evenly distributed in the drum.
If you notice that the load is lopsided, open the door and redistribute the clothes.
2. Reset the Washer
Sometimes, a simple reset can solve the problem. Unplug your Samsung washer from the power source and wait for a few minutes.
Afterward, plug it back in and restart the machine. This may help to resolve any minor glitches that are preventing the washer from spinning.
3. Check the Door Lock or Lid Switch
If the door lock or lid switch is malfunctioning, your Samsung washer may not spin. First, check if the door is properly closed and latched.
If it is, but the washer still won’t spin, there may be an issue with the door lock or lid switch. You can inspect these components for any visible damage and replace them if necessary.
4. Inspect the Drive Belt
A worn or damaged drive belt can also cause the washer to not spin. To check the drive belt, unplug the machine and remove the back panel.
Look for any signs of wear, such as fraying or cracking. If the belt appears to be damaged, you’ll need to replace it with a new one.
5. Ensure Proper Drainage
If your Samsung washer is not draining properly, it may not spin. Check for any clogs in the drain hose or filter, and clean them out if necessary.
Additionally, make sure that the drain hose is not kinked or twisted, as this can impede proper drainage.
6. Other Potential Culprits
If none of the above solutions work, there may be other underlying issues causing your Samsung washer to not spin.
Some possible culprits include:
Motor Coupling
The motor coupling connects the motor to the transmission. Over time, it may wear out or break, preventing the washer from spinning. Inspect the motor coupling for any signs of damage and replace it if needed.
Suspension Rods (Top-loader)
Top-loaders are equipped with suspension rods that help to stabilize the drum during the spin cycle. If these rods become worn or damaged, the washer may not spin properly. Check the suspension rods for any signs of wear and replace them if necessary.
Shock Absorbers (Front-loader)
Front-loaders use shock absorbers to minimize vibrations during operation. If these shock absorbers wear out, the washer may not spin as intended. Inspect the shock absorbers for any signs of damage and replace them if needed.
Drum Nut (Top-loader)
In some cases, a loose drum nut can cause the washer to not spin properly. Locate the drum nut at the center of the agitator and tighten it securely. Be careful not to overtighten, as this can cause damage.
When a Samsung washing machine experiences issues with spinning, a specific error code might appear to indicate these problems.
Common error codes related to a Samsung washer not spinning might include:
- DC, UE, E3: These codes often signal unbalanced load issues. The machine might have trouble spinning properly due to unevenly distributed laundry, triggering these error codes.
- SE, 3E, 3C: These codes might relate to issues with the motor, such as a motor malfunction or tachometer error, hindering the spinning function.
- 5E, ND: These codes typically indicate drainage problems, suggesting issues with water draining properly from the machine. This could affect the spin cycle as well.
- LE, DE: These codes might pertain to door-related issues, such as a faulty door lock or door latch, preventing the machine from entering the spin cycle.
- LE1, E6: These codes can signify problems with the motor, including motor failures or issues with the drive system, potentially affecting the spinning action.
Now that you’re familiar with possible solutions to fix your Samsung washer not spinning issue, it’s essential to have a reliable appliance repair service by your side. That’s where TechVill comes in.
TechVill is Your Best Choice When Samsung Washer Not Spinning
TechVill Appliance Repair Ltd. is a trusted appliance repair service provider in Calgary, specializing in same-day repairs for various appliance types and brands, including Samsung appliances.
We prioritize customer satisfaction, transparency, and clear communication, ensuring that their clients receive top-notch service without breaking the bank. With a service warranty and certified technicians, TechVill is committed to delivering lasting results.
As an authorized appliance service provider, TechVill is equipped to handle washing machine repairs for major brands such as Maytag, Whirlpool, Frigidaire, Samsung, LG, and more.
Our certified journeyman technicians have extensive experience in handling all types of appliance issues, including Samsung washer not spinning problems.
TechVill’s services cover a wide range of appliances, including washers, dryers, dishwashers, fridges, ovens, cooktops, and more.
What sets TechVill apart is our dedication to providing personal service and quick, reliable repairs. Positive customer reviews and repeat clients attest to our commitment to customer satisfaction.
Whether you need a repair, installation, or valuable advice on maintaining your household appliances, TechVill has got you covered.
Operating in multiple locations around Calgary, including Airdrie, Chestermere, Cochrane, Canmore, and Okotoks, TechVill provides professional repair services where you need them most. They specialize in repairing different major brands like Amana, Bosch, LG, Samsung, and more.
When your Samsung washer refuses to spin, don’t let it disrupt your daily routine. Follow the troubleshooting steps outlined in this guide and reach out to TechVill for professional assistance. Trust TechVill to have your Samsung washer spinning as good as new in no time.
FAQs on Samsung Washer Not Spinning
Is there a reset button for a Samsung washer?
Samsung washing machines typically don’t have a physical reset button like some other appliances might.
However, you can perform a reset by unplugging the machine from the power source for a few minutes (usually around 5-10 minutes), then plugging it back in.
This action often functions as a reset and can help resolve minor issues or glitches in the machine’s operation.
How to balance the load in a Samsung washer to prevent it from not spinning?
To effectively balance a load in a Samsung washer and prevent spinning issues, evenly distribute clothes inside the drum, avoiding clustering or bundling items together.
Mix large and small items, washing similar materials together, and avoid overloading the machine, adhering to the recommended load capacity.
Utilize specific cycles like “Bulky” or “Sheets” for larger items and consider running a “Spin Only” cycle if imbalance occurs mid-cycle, allowing for adjustments to redistribute the load more evenly.
These practices maintain an equilibrium within the washer, minimizing the risk of an unbalanced load during spinning and ensuring optimal washing performance.
Where can I download the user manual for my specific model of Samsung washer to troubleshoot the spinning issue?
Visit Samsung’s official website and navigate to the “Support” or “Product Support” section. There, you can search for your specific washing machine model using its model number or name.
