Technicians Available Now: May 25

How to Replace Your Frigidaire Water Filter

Ensuring clean, fresh water is vital for every household, and when it comes to Frigidaire refrigerators equipped with water filters, regular maintenance is key.

However, navigating the replacement process can sometimes be daunting. Whether you’re experiencing reduced water flow, odd tastes, or simply need to perform routine maintenance, understanding how to replace your Frigidaire water filter is essential.

This guide aims to demystify the process, providing step-by-step instructions and addressing common issues to help you effortlessly maintain a continuous flow of crisp, clean water from your Frigidaire refrigerator.

Quick Answer

To replace your Frigidaire water filter, start by locating the filter’s housing within your refrigerator.

Turn off the water supply, twist the old filter counterclockwise to remove it, and discard it. Insert the new filter into the housing and twist it clockwise to secure it in place.

Run water through the dispenser for a few minutes to flush out any air or impurities.

Reset the filter indicator light if applicable, and voilà – you’ve successfully replaced your Frigidaire water filter, ensuring a continuous supply of clean and refreshing water for your household.

But let’s break it down in more detail to make it easier for you to do it yourself.

Steps to Replace Your Frigidaire Refrigerator’s Water Filter

Step 1: Find the Location of the Water Filter

Before you begin replacing the water filter in your Frigidaire refrigerator, you need to locate where it is.

The water filter is usually located in the upper right corner inside the refrigerator compartment. Open your refrigerator and look for a cylindrical filter housing.

Note that the location of the water filter within a Frigidaire refrigerator can vary based on the model. Certain models might have the filter placed differently, such as at the bottom grill, in the base grille beneath the doors, or externally at the back of the refrigerator.

You can check the model number and the instructions from the manufacturer to see exactly where it is located in your case.

Step 2: Turn Off the Water Supply

Before removing the old water filter, it is important to turn off the water supply to your refrigerator.

Locate the water supply valve, usually found behind the refrigerator or under the sink. Turn the valve clockwise to shut off the water supply.

Step 3: Remove the Old Water Filter

Once the water supply is turned off, it’s time to remove the old water filter. Grab the filter housing firmly and turn it counterclockwise. The filter housing will loosen and come out.

Be cautious of any water that may still be inside the housing.

Step 4: Install the New Water Filter

To install the new water filter, remove the protective cover from the filter. Align the filter with the filter housing and insert it. Turn the filter housing clockwise until it is tight and secure.

Step 5: Turn On the Water Supply

After installing the new water filter, it’s time to turn on the water supply. Locate the water supply valve and turn it counterclockwise to open the valve. You will hear the water flowing into the filter.

Make sure there are no leaks around the filter housing.

Step 6: Reset the Water Filter Indicator

Most Frigidaire refrigerators have a water filter indicator that needs to be reset after replacing the water filter. Check your refrigerator’s manual for specific instructions on how to reset the indicator.

Typically, you will need to press and hold the reset button for a few seconds until the indicator light changes or resets.

Now that you have successfully replaced the water filter in your Frigidaire refrigerator, you can enjoy clean and filtered water again.

However, if issues persist despite the replacement, it might indicate an underlying problem.

In such cases, it’s advisable to seek assistance from a professional technician familiar with Frigidaire appliances to diagnose and resolve any persistent issues effectively.

TechVill: Your Frigidaire Water Filter Experts & Appliance Repair Wizards in Calgary

TechVill, the go-to destination for top-notch appliance repair services in Calgary, extends its expertise to Frigidaire water filter replacements and a spectrum of Frigidaire appliance repairs.

Ensuring crystal-clear water from your Frigidaire refrigerator, our certified technicians possess a wealth of experience in handling major brands like Frigidaire, Maytag, Whirlpool, LG, Samsung, and more.

Beyond fixing washers, fridges, ovens, dryers, and stoves, our knack for detail shines when it comes to guiding homeowners through the intricate process of changing a Frigidaire water filter.

TechVill – small business champions a personal touch, backed by rave reviews and a service warranty, making them the ultimate choice for quick, reliable fridge repairs in Calgary and surrounding areas like Airdrie, Chestermere, Cochrane, Canmore, and Okotoks.

For hassle-free maintenance or a seamless refrigerator water filter replacement, TechVill’s experts are primed to deliver exceptional service, ensuring your Frigidaire keeps pouring crisp, clean water without a hitch.

Call us by this phone number (587) 316-8169 or fill in an online form and receive the best experience with TechVill Appliance Repair.

Frequently Asked Quest

The frequency of replacing the water filter in a Frigidaire refrigerator typically depends on your usage and the specific model.

As a general guideline, it’s recommended to replace the water filter every six months. However, if you notice a decrease in water flow or a change in the taste or quality of the water, you might need to replace it sooner.

Some advanced Frigidaire models have filter status indicators that will signal when it’s time for a replacement.

Always refer to the refrigerator’s manual or documentation for the manufacturer’s specific recommendations for your model. 

Frigidaire refrigerators commonly use water filters designed to fit their specific models. The type of water filter your Frigidaire refrigerator needs depends on the model and series.

Frigidaire typically uses either PureSource or PureSource Ultra water filters for their refrigerators.

To ensure you get the right filter, it’s best to refer to the refrigerator’s manual or documentation. The manual will specify the correct type or model number of the water filter needed for your particular Frigidaire refrigerator.

You can also find this information on the manufacturer’s website by searching for your refrigerator model number in their filter compatibility list. 

When replacing a Frigidaire water filter, a few common issues might arise:

  • Difficulty in Removing the Old Filter: Sometimes, the old filter might be stuck, making it challenging to remove. This could be due to sediment buildup or improper installation of the previous filter.
  • Leakage or Drips: Improper installation of the new filter or not securing it tightly enough can lead to leaks or drips, causing water to spill inside the refrigerator or on the floor.
  • Air Pockets or No Water Flow: After replacing the filter, air pockets might get trapped in the system, causing sputtering or a temporary decrease in water flow. Running the water dispenser for a few minutes usually resolves this issue.
  • Incorrect Filter Installation: Inserting the filter incorrectly or using the wrong filter type for your specific Frigidaire model can lead to problems, including water not being properly filtered or the filter not staying in place securely.
Submit the form and we will contact you shortly
Latest News

We thank you for contacting us

Our colleagues will contact you as soon as they receive this information. Don’t worry, we will repair your appliance.

Request a callback from us!

Book now and get Christmas $100 discount on General diagnosis of all main appliances in your home*
*Can be applied for a second and other appliances when order regular diagnostic of the first appliance with a regular price.